How to Unplug the Alternator in a 1993 Nissan Pickup

104 6
    • 1). Open the engine compartment and disconnect the negative battery cable to prevent electrical shock when you are working with the alternator.

    • 2). Remove the pivot bolt from the alternator using a socket and ratchet. Push the alternator inward. Lift the drive belt from the alternator pulley.

    • 3). Disconnect the wire from the alternator. The main electrical lead that comes from the battery is under a rubber boot. Pull the rubber boot back and remove the nut holding the wire to the post using a wrench. Disconnect the voltage regulator harness by inserting a screwdriver into the notch and push the clip down while pulling the harness apart.

Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.